Tag: Restoring Furniture

Today, rattan garden furniture is the most preferred choice when it comes to a person picking their patio furniture. Despite how amazing and practical these rattan furniture suites are, if you’ve previously opted for a lower quality one, it may now be showing signs of wear and tear. Outdoor furniture is not always easy to clean and cheaper sets can get damaged due to exposure from sunlight and rain. It is at this point that we’d encourage you to look at a new suite but if you’re currently not in the position to afford a new one, we’ve listed some tips on how you can restore your set below.
  1. Examine and Assess

First of all, you should start by giving your rattan garden furniture a thorough examination. Remove any cushions that you may have and place the suite where there is a good source of light to allow you to check exactly what is worn or damaged. Next, you need to assess the damage and make the decision of whether it could just be cleaned, if it needed a coat of paint or if it needs to be replaced. You’ll need to see if there is any damage in the frame and also check if there are any parts where the wicker weave is damaged or has loosened.
  1. Cleaning The Rattan

The next step it to start cleaning the rattan. For cleaning, use a stiff bristled brush or a toothbrush to scrub away all of the dirt and grime. You could also use the vacuum brush attachment to the clean the furniture. Once the brushing is out of the way, make a solution of warm water and dish washing soap and using a soft sponge clean the furniture. Wipe the furniture down using a rag and clean water. Do not hose or use excess water soaking the furniture as it might damage the rattan.
  1. Glue Those Loose Pieces

Check for loose strands around the leg and other regions. Use an epoxy glue or super glue to secure it back in place. May sure you don’t use an excess amount as you don’t want to spoil the appearance of the wicker work, therefore you need to ensure you wipe away any spillages or bubbles.
  1. Replace and Weave Strands

In case the unfortunate case that you come across any strands that are beyond repair and ultimately that are cutting through the frame, you may have to replace it with a new strand. You can buy wicker strips for this purpose from some manufacturers or craft store. If you decide to do this, then make sure you soak the wicker strips for 1/2 an hour in water so that it is easier to manipulate. Following this, remove the worn piece and cut just above the damaged region. You will then be able to measure the length of rattan that needs to be replaced. Always add 2 inches to the desired length to be safe and cut. Finally, you now just need to weave it back into the same pattern. This may be quite hard to do, depending on the complexity of your suite but you can use glue to keep your weave in place.
  1. Add Paint and Varnish

The last step to take Is to paint your furniture. Spray paint typically works well as it covers all the little hidden bits the eye will miss. You can finish off your work by coating it with a lacquer for that finished look or you can spray primer to the piece and let it dry for 24 hours, and then repaint with white paint. Finally, complete the look with a coat or two of varnish in order to restore a natural and authentic look to the material.